With this relay, you can add a programmable, variable intermittent feature to a Vanagon that only has a fixed interval, or even no intermittent feature. If you already have the fixed interval feature, simply remove your #19 wiper relay and put this one in. If you have no intermittent feature, you can remove a small tab in the stalk to allow the switch to go down to the intermittent position. It's covered in the Bentley manual, or I can show you how. It works this way- turn your wiper on to intermittent, then immediately off. Decide how long you want the delay. Turn it back on to intermittent when the desired interval has passed. The system now remembers that interval until you change it. $15.50 including shipping to the U.S. I have several. Send me an e-mail if you are interested. Ed |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.