Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (October 2011, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 14 Oct 2011 21:18:08 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Head gasket, cracked head, or more?
Comments: To: Ken Lewis <kdlewis@NORTHSTATE.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

if the engine has not run for a while.. there will be no oil pressure .. so if you turn on the key, see the warning light, and unplug the oil pressure switch .. the light will go out immediately.

here is a related test though .. fire up the engine .............so it's running and has oil pressure. Shut off the engine, but turn the key back on as quickly as you can.

the residual oil pressure will keep the light off. and that time duration ..........depending on oil viscosity and temperature, can give a very rough idea of bearing clearance and oil pressure...the time it takes for the oil light to come on.

for example......pretty tight engine ............pretty thick oil, say 20W50 ...and the engine is cold. start it up ......let it run a minute at medium rpm .. shut it off, turn the key back on immediately. oil pressure can be high enough under those circumstances that it can take even 20 seconds for the light to come on .................that is, for the residual oil pressure to bleed off.

in the scenario below .. the oil pressure light better go out immediately .. electricity travels at the speed of light I believe. gonna be hard to time that time interval.

Scott

----- Original Message ----- From: "Ken Lewis" <kdlewis@NORTHSTATE.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, October 14, 2011 1:48 PM Subject: Re: Head gasket, cracked head, or more?

> ED, > I believe the oil pressure light is a separate problem. Here is how I > would > proceed to test that theory. Turn on the ignition but do not start the > car. > Unplug the oil pressure sensor. Have someone time how long it takes for > the > light to go out. If the duration is the same there is a problem in the > warning circuit. > > Good Luck, > Ken > > > ----- Original Message ----- > From: "Ed Duntz" <eduntz@hotmail.com> > To: "Ken Lewis" <kdlewis@NORTHSTATE.NET>; <vanagon@GERRY.VANAGON.COM> > Sent: Friday, October 14, 2011 4:28 PM > Subject: Re: Re: Head gasket, cracked head, or more? > > >> Those bubbles would be one thing, but my worry is the combination of the >> bubbles (foam, really), the water in the exhaust, and the delay in the OP >> light going out. >> >> Ed >> >> -------------------------------------------------- >> From: "Ken Lewis" <kdlewis@NORTHSTATE.NET> >> Sent: Friday, October 14, 2011 4:16 PM >> To: <vanagon@GERRY.VANAGON.COM> >> Subject: Re: Head gasket, cracked head, or more? >> >>> FWIW; >>> >>> I got a lot of worrisome bubbles in the coolant reservoir after >>> installing >>> my rebuilt engine. Evidently it takes quite some time for them to all >>> purge >>> out because now it is fine. >>> >>> Good Luck, >>> Ken >>> >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.