Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2011, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 30 Oct 2011 16:32:10 -0400
Reply-To:     Ken Lewis <kdlewis@NORTHSTATE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Lewis <kdlewis@NORTHSTATE.NET>
Subject:      Re: An interesting article on gas mileage vs wheel size
Comments: To: BenT Syncro <syncro@gmail.com>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Two wheel drive DOKA.

Offset is 42. I arrived at the back spacing by dividing the width, 7.5"(190.5mm) by two and adding the offset. A formula I found in the Vanagon archives. I "assumed" it to be correct. Ken

----- Original Message ----- From: "BenT Syncro" <syncro@gmail.com> To: "Ken Lewis" <kdlewis@NORTHSTATE.NET> Cc: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, October 29, 2011 3:32 PM Subject: Re: An interesting article on gas mileage vs wheel size

Putting on a 2wd? Do you have the offset rather than a measured or calculated backspace? It's the figure that says 'ET' followed by a couple of numbers. I'd like to help but don't want to rely on the expression of offset as backspace because accuracy can be affected by how you arrived at that number IMHO.

BenT

sent from my electronic leash

On Oct 29, 2011, at 9:43 AM, Ken Lewis <kdlewis@NORTHSTATE.NET> wrote:

> I found this article while researching what it would take to get 17"x7.5" > Audi A4 wheels to work on my crewcab. > > This line caught my eye;" What's immediately apparent from the results is > that as the wheel-and-tire packages get larger and heavier, acceleration > and > fuel economy suffer. Neither is a huge surprise, but we measured a > 10-percent drop in fuel economy and a four-percent degradation in > 0-to-60-mph acceleration from the 15s to the 19s". > > I looked at these this morning. > http://winstonsalem.craigslist.org/pts/2618213904.html . Nice looking BIG > wheels. Some road rash. He also has the longer lug bolts. > > The bolt hole size is good but it appears the center bore (~57mm) would > need > to be opened up. I need to actualy take a front wheel off my truck and do > some measuring . I have read the grease cap can be shortened to get rid > of > the lip. > > I arrived at a back spacing of 137.25mm on the Audi wheels . By my > calculations I would need a 14mm spacer? Anyone? > > Thanks Ken


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.