Thanks for the replies I received. It looks like I need to pull the injectors and see if they are spraying. Just to confirm - yes I do have spark and I am sure the pump is running. So, if the injectors aren't spraying so far I see that I should look at the Hall Sender or possibly wiring or a ground to the injectors themselves. Anything else I should look at? Any tricks or warnings in pulling those injectors (I've never done it before)? Thanks, Jeff |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.