Hi Miguel, I see the dry time for JB is 4 to 6 hours? 15 hours to Use time. >>>DRYING: Allow 4-6 hours for drying before handling. Allow to dry overnight (approximately 15 hours) before putting object to use. J-B WELD works faster if used in a room with a temperature above 50� F. After J-B WELD has cured for six hours, a heat lamp or light bulb placed near the weld will speed drying time. I have use an Epoxy Metal filler with about a 30 Minute dry time to patch a 90 Subbie Oil pan in my Vanagon. Stayed there till I installed a shortened pan. I would suggest this type product, used with a lot of de-greaser just ahead of it. ( it needs to dry as well, but dry time for most degreaser's in a matter of seconds. also lots of rags. clean clean clean. best, John On Sun, Nov 13, 2011 at 6:39 PM, miguel pacheco <mundopacheco@gmail.com>wrote: > We just arrived in Gerrero Negro, staying at a nice little rv park, > Malarrimo, across the street from a known good welder. Yup, have a > small, hairline crack, on tranny case, just forward of diff, on DS, > where diff butts to tranny. It only weeps, but am afraid of the crack > spreading and dumping contents, so am stopping frequently and checking > tranny level (91 Syncro.) We shall see what happens tomorrow. My > question is, what is the material that I'm proposing to have welded? > Is it aluminum or some exotic alloy? > In Bahia De Los Angeles, I had one of the local mechanics look at it > and he tried to JB Weld it, but the weeping impeded all efforts to get > this goop to adhere. He then applied bar soap to it and it > miraculously stopped leaking. My girlfriend thought that was > hilarious, but I wasn't laughing much, knowing the damned thing was > going to continue leaking....which it did, a couple of miles out of > town. > Any ideas welcomed, thank you very much! > In the mean time, Fritz has been running like a big champ, without a > hiccup. The beaches are beautiful, the people friendly as always, the > food deliciosa! > Back to the current issue, any advice appreciated. Just what is the > material?....and yes, I have emailed German Transaxle for advice. > BTW internet has been scarce and unreliable when found...... > Gracias, > Miguel > > -- > Miguel > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.