I may have read of other Vanagon wrenchers prefer copper nuts and washers. or I heard it from a guy at my mechanic's shop sharing the owner experience. IDK about copper bolts - I would expect stainless steel but IDK about heat exchange/transfer between copper and ss. --- On Mon, 11/28/11, Gregg Carlen <gregg.carlen@GMAIL.COM> wrote: > From: Gregg Carlen <gregg.carlen@GMAIL.COM> > Subject: Nuts and bolts to use on exhaust > To: vanagon@GERRY.VANAGON.COM > Date: Monday, November 28, 2011, 6:06 PM > So, while doing the head on my van > (1990 2WD Westy), I was able to 'safely' > remove the header bolts and nuts between the exhaust and > head. Of course, > these are one-time use hardware. Aside from just using 12 > and 13mm nuts and > bolts, can anyone recommend good quality hardware that will > stand the test > of time to use on the exhaust system so the next time I > have to remove them > for whatever reason, that I have a better chance of safe > removal? > > Thanks, > Gregg > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.