Date:         Sat, 26 Nov 2011 05:48:29 -0600
Reply-To:     James Felder <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         James Felder <jim.felder@GMAIL.COM>
Subject:      Re: '91 campmobile table rattle
Comments: To: "mcneely4@COX.NET" <mcneely4@COX.NET>
In-Reply-To:  <20111125233250.ESKMQ.22312.imail@eastrmwml108>
Content-Type: text/plain; charset=us-ascii

See the article here:

http://www.knology.net/~felder/Vanagons/

Jim



On Nov 25, 2011, at 10:32 PM, Dave Mcneely <mcneely4@COX.NET> wrote:

> thanks for the offer Zoltan.  I am in Oklahoma.  So, exactly how does this magnetic fix work?  when you speak of an anchor at the bottom of the leg, what sort of anchor?  It is not loose at the bottom.  The table rocks a bit on the horizontal support, even when the bolt there is tight.  mcneely
> 
> ---- HotelWestfalia <zolo@foxinternet.net> wrote:
>> I installed a magnet that keeps it by the wall, so I don't have to tighten
>> any of those bolts by hand.  But if you don't have an anchor at the bottom
>> of the leg, it may rattle more.
>> If you are in the Seattle area, I can install one of those magnets for you.
>> Zoltan
>> 
>> ----- Original Message -----
>> From: "Dave Mcneely" <mcneely4@COX.NET>
>> To: <vanagon@GERRY.VANAGON.COM>
>> Sent: Friday, November 25, 2011 4:48 PM
>> Subject: '91 campmobile table rattle
>> 
>> 
>>> Does anyone know how to cure this?  When I got the beast in April 2009 the
>>> table was rattling.  I found that it simply was not tightened enough.
>>> Over time, it has gotten so that it rattles more and more.  Tightening the
>>> bolts nor longer prevents it from rattling.  I have some fixes in mind to
>>> try this weekend, but thought I would check to see if someone else has had
>>> success with something.
>>> 
>>> Thanks, mcneely
>>> 
>> 
> 
> --
> David McNeely