At 12:10 AM 12/22/2011, Jeff Lincoln wrote: >I do have some unconnected wires (there were some before I started) - I >guess we didn't pay close enough attention (damn). SO does power and ground >run to the blower run separate from the wires that attach to the switch? The switch has one common lead that comes from the load reduction relay circuit and supplies the power, and three leads going to the blower for the three speeds. The blower has a separate ground which should be brown and probably goes to the star clusters on the left wall. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.