I've got problem with a leaking assembly plug in the pan of an 81 Westy. Had it in the shop for a new front seal and the mechanic told me that he had noticed this plug leaking and had applied sealant. Upon inspection I found that he merely smeared a heavy layer of silicone on the outside of the plug. Needless to say it still leaks. I've got the engine out to replace the throwout bearing and the pilot shaft bearing and would like to repair this leaking plug properly. Unfortunately I'm unsure of what the proper repair procedure is. I'm at a disadvantage in that all I have is a Chilton's and the Idiot's Guide. I think that I'm going to need to find a Bentley. Any advice/BTDT/opinions will be appreciated. Gary Meier |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.