OK, new generic sensor is in. After warm-up the voltage swings from .18 to .84. The van seems to be running well. I will continue to drive it all weekend. Thanks again for your help, I hope this was the issue. Bryan -----Original Message----- From: Scott Daniel - Turbovans Sent: Monday, January 02, 2012 4:33 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: My turn with the O2 sensor issue. Hi, I only test them while connected to the ecu ..and engine running, warmed up. if it's only .15 to .17 volts ..it's stone dead. you want to see a pretty large swing .... .2 to .7 or .8 Large swing. I've had them fail in as little as a year, fwiw. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.