On 86+ models it is trivial to pull the coolant level relay type 42/43 from the main relay panel position 3. Do this and see if the false blinking stops.
Mark
Mister Tom wrote: > When I start my '87 Syncro Westy the LED flashes as it should, then stops. > Recently it has been coming back on blinking, sometimes for a bit, then > stopping by itself. Other times it stays until I turn the power off and > restart. > > Burp tank is full and cap sensor is duly wiggled. Still happens. > > I know there is a voltage regulator and a castapitor on the instrument > cluster. Is it time to shotgun these, or might there be a better starting > point, given my symptoms. > > TIA, > > Tom Salicos > '87 Syncro Westy EG-33 > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.