Date:         Wed, 25 Jan 2012 19:20:09 -0800
Reply-To:     Rob <becida@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rob <becida@COMCAST.NET>
Subject:      Re: Fuel tank cleaning.
Comments: To: mark drillock <mdrillock@COX.NET>
In-Reply-To:  <4F203DAB.2010104@cox.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

The one tank I opened up had no screen, does anyone have a picture of
it? Here is the tank from my '84
http://s197.photobucket.com/albums/aa190/becida/84%20Fuel%20tank/ . I
did later take the plate off to inspect the tubes, just tubes. A
photo would be great!

As to the tank question I went with
http://www.van-cafe.com/home/van/page_1178_1457/fuel__gas_tank.html
for $225, solved a lot of problems.

Rob
becida@comcast.net
Western WA state


At  1/25/2012 09:36 AM, mark drillock wrote:
>The tank has a very fine mesh screen inside on the end of the fuel
>pickup. Any coating applied inside the tank will likely ruin the tank if
>it gets on the screen. I don't see how you could keep it away from the
>screen.
>
>Mark