Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2012, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 28 Jan 2012 10:51:35 -0800
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Fixed my Honda, Thought: Honda 2.4 I-VTEC Engine into Vanagon?
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
In-Reply-To:  <018f01ccdda1$1872ed80$0200a8c0@PROSPERITY>
Content-Type: text/plain; charset=ISO-8859-1

Hi Scott. I'm sure you know this, but one original reason the older Honda engines rotated CCW: they were installed in RH drive vehicles.

My K series engine rotates CW as does the WBX. Under "VOLKSWAGEN AND PORSCHE ENGINE ADAPTERS" KEP shows S2000, Prelude 2.2 - 2.3 adaptor plates. An email would confirm if the bolt patterns were the same for I-VTEC or VTEC Honda engines.

The VTEC engine swap is common for older Hondas. Heck even for older Mini's: http://www.minimania.com/web/Item/MT510000/InvDetail.cfm Parts to adapt the VTEC electrical's to an older Honda are easy to find.

This image from eBay appears to be my engine:

http://www.saccar.com/images/saccar/Engine_Acc_03_4cyl.JPG

Seller of that engine claims it has 89K miles. Listed at $550 "Buy it Now".

Given my minor revelation that some Honda engines rotate CW, thought I'd pursue the idea a little and throw what I found out into the ring. IMO, IF engine dimensions were suitable, it might be a viable option for the DIY type.

Neil.

On Sat, Jan 28, 2012 at 1:41 AM, Scott Daniel - Turbovans <scottdaniel@turbovans.com> wrote:

> Find out which way the engine turns first. > that late a Honda engine may turn 'normal clockwise.' > > for many years of Honda engines turned counterclockwise.. > i.e. 'backwards.' > An 85 Accord's engine does for example. > > scott > www.turbovans.com > posting from Honolulu ! > on an engine conversion job. > > ----- Original Message ----- From: "neil n" <musomuso@GMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Friday, January 27, 2012 10:44 AM > Subject: Fixed my Honda, Thought: Honda 2.4 I-VTEC Engine into Vanagon? > >

> The Vanagon archives and Google show that most older Honda older > engines spin CCW (facing engine pulley). Mine spins CW as does some > other later MY Honda engines.

-- Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.