@ the OP. The pressure bleeders aren't hard to build. There's info on this in the archives. Though not the same as the Motive, the pressure bleeder I built pressurizes the system with air. From what I've read, one has to be careful not to put the fluid reservoir under too much pressure. IIRC, even 12 PSI was enough to push fluid through system. Very useful tool and not hard to make. Neil. On Tue, Jan 31, 2012 at 1:23 PM, John Anderson <wvukidsdoc@yahoo.com> wrote:
>
> Anyway for 1 person bleeding in my mind this is the shit:
>
> http://www.amazon.com/Motive-Products-Bleeder-Adapters-European/dp/B0002KM5L0
--
Neil n
65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp
'81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/
Vanagon VAG Gas I4/VR Swap Google Group:
http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.