Just a suggestion for a really slick way to plug off the rear heater lines. I had a baypass loop in place but have always wanted to redo my fix after reading how this could short circuit the flow to the front heater. Found these brass barbed plugs at the local big orange box store and installation took all of 5 minutes using the existing spring clamps, 3 of which were getting the cover (not sure why I had that in there still) off. Hope this helps someone else... http://www.homedepot.com/Plumbing-Pipes-Fittings-Valves/h_d1/N-5yc1vZbqpfZ1z114x6/R-202300068/h_d2/ProductDisplay?catalogId=10053&langId=-1&storeId=10051 Gregory Smith '88 Vanagon GL '77 Lancia Scorpion gregoryfsmith.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.