Date:         Sat, 11 Feb 2012 09:59:12 -0700
Reply-To:     Gregory Smith <gfs@GREGORYFSMITH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Gregory Smith <gfs@GREGORYFSMITH.COM>
Subject:      rear heater hose plug suggestion
Content-Type: text/plain; charset="utf-8"

Just a suggestion for a really slick way to plug off the rear heater
lines.  I had a baypass loop in place but have always wanted to redo my
fix after reading how this could short circuit the flow to the front
heater.  Found these brass barbed plugs at the local big orange box
store and installation took all of 5 minutes using the existing spring
clamps, 3 of which were getting the cover (not sure why I had that in
there still) off.  Hope this helps someone else...

http://www.homedepot.com/Plumbing-Pipes-Fittings-Valves/h_d1/N-5yc1vZbqpfZ1z114x6/R-202300068/h_d2/ProductDisplay?catalogId=10053&langId=-1&storeId=10051

Gregory Smith
'88 Vanagon GL
'77 Lancia Scorpion

gregoryfsmith.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.