cool, I'd read what you have to say on engine O/H on the site if I could find it . '96' refers to diameter in mm and not year I assume. On 3/1/2012 6:52 AM, phil cain wrote: > A 2.2L engine is a 2.1L with 96 P/L's on it, where to get the rings is the only problem I forsee. It is a simple re-build, the only difference is on the bearings, you have to be careful putting the front bearing on (#1) , with the spacers and all, re-place the oil pump, and rod cap bolts. have the rods re-sized hone the liners, new rings. Look on http://fullmoonbusclub.com/news.php thec section,I have shown how to O/H the engine. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.