The temp 2 sensor and fuel injectors use the same connectors. Cal-Term-08653 works. This connector pigtail also works on the throttle switch and for the 1.9L engines the auxiliary air regulator. Going to air cooled it fits the cold start valve. Pulling back boots a paper clip can be used to access the wires for testing. I don't see why you would need a cut up harness to test things out. What are your symptoms? Maybe we could help. The Vanagon fuel injection is that that complex. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Hector Zapata Sent: Monday, March 12, 2012 6:49 PM To: vanagon@GERRY.VANAGON.COM Subject: WTB: 1986-91 wire harness I need the harness so I can use the connectors to troubleshoot my Digifant system, doesn't have to be in great condition since it is going to be cut. Or, if anybody has the loose connectors already available (with at least a couple of inches of wire), better yet. I also need the a/c compressor harness, the longer the better, so I can repair mine. Please email me off-list. Thank you, Hector 1990 Carat 'Ursula' |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.