Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2012, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 8 Mar 2012 13:45:56 -0500
Reply-To:     Tom Buese <tantonbz@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Buese <tantonbz@GMAIL.COM>
Subject:      Re: d pillar air intake hose
Comments: To: Edward Maglott <emaglott3@gmail.com>
In-Reply-To:  <CABToOYJWFjGszyeMdmbuhRvf97ZriSrRp46qjzPxP1SDBWy4VQ@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Da Snorkle?

Mr. BZ-for vanagon underwater breathing

On Thu, Mar 8, 2012 at 1:08 PM, Edward Maglott <emaglott3@gmail.com> wrote:

> I'm also looking for that. Took mine off because it was damaged. I > noticed a surprising increase in intake noise with that hose gone. > Thanks, > Edward > > On Thu, Mar 8, 2012 at 12:40 PM, Zeitgeist <gruengeist@gmail.com> wrote: > > > Hi Gregory, I assume what you're talking about is the tubing that fits on > > the outer side of the plastic cover that separates the engine compartment > > from the pillar chamber. If that tubing is the same diameter as the > piece > > that fits between the air cleaner and that plastic cover, I might have > > something that will work. I recently stripped a Mercedes from the same > > era, and it uses ribbed plastic tubing of the same size for the climate > > control air ducts. If you want to give it a try, it's yours. I also > live > > in Oly. > > > > On Thu, Mar 8, 2012 at 8:19 AM, Gregory Smith <gfs@gregoryfsmith.com> > > wrote: > > > > > Hey gang, > > > > > > Wondering if anyone has a source for the ribbed hose in the d pillar > > > that connects the upper plastic part to the part behind the taillight. > > > Not even sure what to call it. It looks like a 3" dia. > > > metal/plastic/paper hose, but compressed into an oval section. Open to > > > suggestions. > > > > > > Mice managed to shred mine and made a nice nest in the air filter > > > housing. Got that cleaned up and put 1/4" mesh over the opening in the > > > d pillar behind the taillight, but would like to replace this hose. > > > > > > Thanks. > > > > > > Gregory Smith > > > Olympia, WA, USA > > > > > > '88 Vanagon GL > > > '77 Lancia Scorpion > > > > > > > > > > > > -- > > Casey > > >

-- Tom Buese


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.