Very simple. Weld a tube to the OEM jack that will accept the OEM front table leg. Drill a hole and weld on a nut to accept the threaded securing bolt. Now you can use your inside table outside. Some considerations; the pipe need only be 6 ~ 8 inches long, cannot be welded in line with the jack leg as the jack is always at an incline so you must install the jack and raise it until there is some weight of the vehicle on it then calculate the angle of the pipe to be welded on. Also, the pipe cannot be welded directly to the jack leg because the table leg when inserted will interfere with the gear at the top of the jack. The pipe must be spaced out about 1/4" from the jack leg. I have made a few of these and use one myself all the time. If you want to use it in the rear jack point with the sliding door open then you will need to make an extension for the jack to sit out proud of the door when open. A solid steel pipe that fits in the jack point can be turned down on one end to fit inside the jack leg that goes into the jacking point. You will need a machine shop with a lath to do this. See photos here <https://picasaweb.google.com/102449862149336184707/JackTableHolder?authkey=Gv1sRgCLXj1q-Q-4rHNA>
On 2012-03-18, at 11:02 AM, Automatic digest processor wrote: > Re: Outside Table for Vanagon
Please note that I will be away from my business travelling from November 01 until April 30, 2012. Parts orders will be processed although not as quickly as usual. I will always be available for contact by E-mail. If you phone your call will be addressed by Greg T. Brown here and he will either call you back or advise you to contact me directly by E-mail. Details of this adventure are on our Travel Blog: http://frankcondelli.com/travels/ Cheers, Frank Condelli Almonte, Ontario, Canada '87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale) Frank Condelli & Associates - Vanagon/Vanagon Westfalia Service in the Ottawa Valley Vanagon Stainless Steel Exhaust Systems BusFusion a VW Camper camping event, Almonte, ON, June 07 ~ 10, 2012 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.