Date:         Thu, 15 Mar 2012 12:57:38 -0400
Reply-To:     Karl Mullendore <tdiguru@WESTYVENTURES.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Mullendore <tdiguru@WESTYVENTURES.COM>
Subject:      Re: Outside Table for Vanagon

I took a few moments and made a photo set of the old bracket I made ten
years ago:  http://www.westyventures.com/rigs.html   Scroll most of the way
down the page for detailed photos. Easily made from common hardware store
items and iron pipe. Minor welding involved, although there may be other
ways to make it stable. In my version, I used an original Westy table knob
to secure the table, and a tiny flat plate strategically welded to stabilize
the bracket and prevent turning in the jack point hole. The 1/4" bent steel
pin locks it in place in seconds.

Karl

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.