Date:         Sun, 18 Mar 2012 14:57:08 -0400
Reply-To:     Pete O <pnoceanwesty@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pete O <pnoceanwesty@GMAIL.COM>
Subject:      Re: Outside Table for Vanagon
Comments: To: Karl Mullendore <tdiguru@westyventures.com>
In-Reply-To:  <vanagon%2012031513050897@GERRY.VANAGON.COM>
Content-Type: text/plain; charset=ISO-8859-1

That's what I'm talking about!

Thanks for the pic, Karl.


Pete
'79 Westy "Aardvark"
'87 Westy "JoesVan"
WWW.Busesbythebeach.org <http://WWW.Busesbythebeach.com>


On Thu, Mar 15, 2012 at 12:57, Karl Mullendore <tdiguru@westyventures.com>wrote:

> I took a few moments and made a photo set of the old bracket I made ten
> years ago:  http://www.westyventures.com/rigs.html   Scroll most of the
> way
> down the page for detailed photos. Easily made from common hardware store
> items and iron pipe. Minor welding involved, although there may be other
> ways to make it stable. In my version, I used an original Westy table knob
> to secure the table, and a tiny flat plate strategically welded to
> stabilize
> the bracket and prevent turning in the jack point hole. The 1/4" bent steel
> pin locks it in place in seconds.
>
> Karl
>