On Mar 28, 2012, at 10:55 PM, Frank Condelli wrote: > Bob, OK, so I see some things different in your photos that are not on my installation. Your tank seems to sit much closer to the frame rail than mine does and the mounting bracket for the frame rail is different.
You may have missed another post of mine where I said that when I cut the "notch" section on the top of the tank to make room for the A/C hoses, I cut off/removed one of the 3 mount points on the plastic tank. That made it necessary to use that SS bracket differently, and that is what has been modified and put on the tank at the frame rail you are mentioning. bob |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.