Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2012, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 3 Apr 2012 20:54:27 -0400
Reply-To:     Edward Maglott <emaglott3@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott3@GMAIL.COM>
Subject:      Re: Rear Wheel Bearing Options
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY152-ds2598D324C5B87279A7F9CA04D0@phx.gbl>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Yeah, now that I think about it, I've done the front with no press. How can you do it with the bearing housing still on the van? Some sort of puller? Thanks for any further tips on this. Edward

At 11:43 PM 4/2/2012, Dennis Haynes wrote: >If you can replace the housing you can change the bearings. With a little >imagination a press is not needed. In fact you can do this with the bearing >housing in place. > >Dennis > >-----Original Message----- >From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of >Edward Maglott >Sent: Monday, April 02, 2012 9:42 PM >To: vanagon@GERRY.VANAGON.COM >Subject: Rear Wheel Bearing Options > >Mine are getting noisy after many years and 215k miles in the 86 van. I was >wondering if any list vendors or mechanics will sell the rear wheel bearing >housing with new bearings and seals in it on an exchange basis? With all >the pressing involved, this seems like a good idea for a service to offer. > >Edward


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.