Ground goes from the trans front nose bolt )on either side) to one of the 3 bolts directly upward where the front trans mounts tie t0 to the frame... Daryl of AA Transaxle 425-788-4070 "On the cutting edge of Old technology" 86 Syncro Westy w/Turbo Zetec in the trunk 90 Doka Tristar w/2.5 Subie
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Ken Olsen Sent: Sunday, April 15, 2012 8:17 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Slow turnover when starting. Thanks for all the great advice guys. > >make sure the trans ground strap is good. > I've located a braided ground strap from the left cylinder head, but I'm not seeing one to the tranny. Where should I be looking. What is a good source for new cabling? I'm just seeing generic stuff on-line. Ken |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.