I remember taking one apart years ago to clean it and didn't pay any attention to how it went back together. I had no problems, and usually there is a key of some sort if assembly matters. Stuart '85 Westy -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of John Meeks Sent: Tuesday, May 01, 2012 4:35 PM To: vanagon@GERRY.VANAGON.COM Subject: Crankcase Breather tower ~ It comes apart !!! So while cleaning the breather tower it came apart in my hands! There are elliptical surfaces on the inner piece and in the outer piece. There are no guides so it can go back together however you push the inner piece in. Anyone know if it matters how it goes back together? Burned 2.1 is almost ready for a test run. John Meeks '91 Vanagon MV Northern Michigan Vanagon Rescue Squad www.vanagonauts.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.