Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (May 2012, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 6 May 2012 19:51:36 -0700
Reply-To:     Joe Fernandez <jfride@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joe Fernandez <jfride@GMAIL.COM>
Subject:      Re: source for solder-on quick disconnects?
In-Reply-To:  <998A9833-9D9C-420F-9278-3E813A0E839E@eoni.com>
Content-Type: text/plain; charset=ISO-8859-1

Boaters have a similar perspective to the off-roaders-crimp only, heat shrink is worthwhile, no solder. And the quality crimper is very important. The link below is an excellent article on crimps and crimpers- aimed at boats but fully relevant to vans. Lots of other great info there for the DIY boater.

http://www.pbase.com/mainecruising/wire_termination

Joe Cayucos, CA 90 Carat 86 Weekender

On Sun, May 6, 2012 at 6:58 PM, Jim Arnott <jrasite@eoni.com> wrote:

> FWIW, off-road racers rarely solder terminals to wiring. They have > found that the solder wicks up the wire and makes it brittle. > > > Typical: http://www.drillspot.com/**products/75912/Greenlee_45500_** > Ratchet_Crimper<http://www.drillspot.com/products/75912/Greenlee_45500_Ratchet_Crimper> > > Jim > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.