Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (May 2012, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Mon, 7 May 2012 13:29:19 -0700
Reply-To:   Jeff Schwaia <vw.doka@GMAIL.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Jeff Schwaia <vw.doka@GMAIL.COM>
Subject:   Re: 2.1 Exhaust. P. 26.9 Bentley: "5 Diaphragm Springs" ?
Comments:   To: David Beierl <dbeierl@ATTGLOBAL.NET>
In-Reply-To:   <4fa81a2f.d1b9e00a.29e1.5cad@mx.google.com>
Content-Type:   text/plain; charset="US-ASCII"

I use these: http://tinyurl.com/exhnut

Standard exhaust manifold nut for BMW and MBZ. They work really well on the Vanagon headers due to the larger seating surface, but still use a 12mm wrench size.

Cheers,

Jeff

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of David Beierl Sent: Monday, May 07, 2012 11:54 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: 2.1 Exhaust. P. 26.9 Bentley: "5 Diaphragm Springs" ?

At 01:15 PM 5/7/2012, neil n wrote: >Image: >https://lh6.googleusercontent.com/-0tqzGn0WwFE/T6gB740u5eI/AAAAAAAAFuM/ >0vRYhIVlLd0/s576/cadmium%2520plated%2520%253F.jpg

Always hard to tell from photos on monitors, but that looks like a copper-plated nut to me. Cadmium (nasty toxic stuff) tends to a light-yellow color. Here's Febi's take on the subject: http://www.germansupply.com/home/customer/product.php?productid=16355

I bought a box of 100 for not a whole lot more than that from my local truly friendly imported auto specialist a few years back. They weren't as fancy as the Febi ones, though. Nice heavy copper, thicker than I would have called "plating."

Solid brass has been recently put forward here as the aviation answer.

The concave washer p/n is 025 251 200, dunno if still available from VW. Out in the Real World it's called a Belleville Washer (see http://en.wikipedia.org/wiki/Belleville_washer )* and you can get them from lots of places including Belleville themselves (in England). Might have to do some calculating to figure out what spec you need that would flatten out with normal torque on an M8x1.25 nut though, or whether VW wanted one that would actually not completely flatten and would give a little flexibility in the joint. Getting hold of an original would help a lot.

*These are on my list as one of the cleverest inventions in the universe...

Yours, David


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.