Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2012, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 6 May 2012 18:40:37 -0400
Reply-To:     phishman068@GMAIL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Craig Cowan <phishman068@GMAIL.COM>
Subject:      Re: source for solder-on quick disconnects?
Comments: To: Tom Hargrave <thargrav@HIWAAY.NET>
In-Reply-To:  <001a01cd2bd2$cd6690f0$6833b2d0$@net>
Content-Type: text/plain; charset=us-ascii

When I'm feeling like soldering on something like a ring terminal, I take regular crimp on terminals and cut away the plastic. I slide a piece of heat shrink over the wire then crimp on the connector as I would. Now solder the connector in place, slide up the heat shrink, shrink it, and good to go.

-craig

On May 6, 2012, at 5:54 PM, Tom Hargrave <thargrav@HIWAAY.NET> wrote:

> I've never seen a solder type terminal that already contains solder. The > flux in the solder core is just as important as the solder for a reliable > connection. > > Thanks, Tom Hargrave > www.stir-plate.com > www.towercooler.com > www.kegkits.com > www.grow-sun.com > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of

> pickle vanagon > Sent: Sunday, May 06, 2012 4:30 PM > To: vanagon@GERRY.VANAGON.COM > Subject: source for solder-on quick disconnects? > > Whenever wiring electrical things (gauges, whatever) I always solder on > crimp-style quick disconnects as I don't trust the crimp connection. this

> is a bit messy. > > I imagine that someone should make a quick disconnect that has some solder

> inside the sleeve where you insert the wire, so just insert, touch with your > soldering iron, and you're done. Does this exist? > > the most promising thing I've found is this: > http://www.fastenal.com/web/products/detail.ex?sku=0710867&ucst=t > which sounds like what I'm looking for. But $120 is a lot. I really only

> want a few quick-disconnects in various gauge sizes. > > Thanks for any help! > -Wes > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1382 / Virus Database: 2411/4981 - Release Date: 05/06/12


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.