we're speakin' waterboxer pretty sure. I don't 'do' air-cooled. BTDT too much. On 5/12/2012 3:54 PM, Dennis Haynes wrote: > For those with air cooled engines the injectors have a resister in series > with them. Direct connection to a 12 volt source can fry them. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Scott Daniel - Turbovans > Sent: Saturday, May 12, 2012 3:17 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: How many Volts at the injectors > > I energize my injectors with 12 volts when I am operating them manual with > electricity. > I don't 'leave' them energized.. > I just click them with 12 volts of and on. > > scott > > On 5/11/2012 8:24 PM, HotelWestfalia wrote: >> I want to build a unit to clean injectors and need to know what voltage to > apply to them. >> The book is only talking about the "flickering" when checking. >> >> Zoltan >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.