Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2012, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 9 May 2012 11:30:22 -0700
Reply-To:     Rocket J Squirrel <camping.elliott@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rocket J Squirrel <camping.elliott@GMAIL.COM>
Subject:      Re: Temp Gauge -- why did this happen?-now flushing tee-
Comments: To: Stuart MacMillan <stuartmacm@gmail.com>
In-Reply-To:  <00a201cd2e0a$dddc37c0$9994a740$@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Right on -- thanks!

Does it matter which heater hose I install this thing on? IOW is one better at draining the system than the other 'un?

-- Jack "Rocket j Squirrel" Elliott Bend, Ore. 1984 Westfalia. A poor but proud people. 1971 "Ladybug"-brand utility trailer ca. 1972 from a defunct company in San Clemente, Calif., now repurposed as The Westrailia.

On 05/09/2012 10:40 AM, Stuart MacMillan wrote: > For now go buy one of these kits: > http://www.prestone.com/products/print/461?popup=1 I'll be making a copper > version this weekend and I'll email you some photos. > > -----Original Message----- > From: Rocket J Squirrel [mailto:camping.elliott@gmail.com] > Sent: Wednesday, May 09, 2012 8:49 AM > To: Stuart MacMillan > Cc: vanagon@GERRY.VANAGON.COM > Subject: Re: Temp Gauge -- why did this happen? > > > On 05/08/2012 09:00 PM, Stuart MacMillan wrote: >> I put a flushing tee in the heater hose under the van. Hook up your > garden >> hose and flush away! Note: The plastic tees you buy at your flaps will >> break in a few years, so either plan on changing it once in a while, >> or make yourself one out of copper pipe. > > Details, anyone? I don't normally work on copper pipe but I do have a > propane torch, some acid flux, and some solder, and I'm not afraid to use > them. Even though I normally use the torch to caramalize crème brûlée. > > -- > Jack "Rocket j Squirrel" Elliott > Bend, Ore. > 1984 Westfalia. A poor but proud people. > 1971 "Ladybug"-brand utility trailer ca. 1972 from a defunct company in San > Clemente, Calif., now repurposed as The Westrailia. > > > >> >> Also, you can never get all of the water out, so first add undiluted >> coolant in the proper amount to get 50%, and then fill with water. >> Here in the northwest we have naturally soft water directly from >> mountain snow melt, so I don't bother with distilled. >> >> Stuart >> '85 Westy >> >> -----Original Message----- >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On >> Behalf Of Rocket J Squirrel >> Sent: Tuesday, May 08, 2012 7:53 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Temp Gauge -- why did this happen? >> >> So we dropped the leaky radiator on my 1.9 and set the hoses to >> drooling into a bucket. Only a few quarts (litres) came out. The cap >> was off the expansion tank. >> >> My son suggested starting the engine for a bit to pump out some more >> coolant. I reckoned it couldn't hurt (watch: I bet I'm wrong) so I >> started the engine. >> >> Within a few moments the temp gauge started climbing. Obviously the >> engine, which had been on for fewer than 15 seconds, was overheating. >> >> So what was the gauge reading? >> >> IN OTHER NEWS, I plan to run a couple loads of distilled water to >> flush out more gunk before we connect the rad and put in coolant. >> >> But if only a gallon or so comes out through passive droolage then >> that ain't gonna work. So I tried a trick that Zoltan told me about: >> stuck my air compressor nozzle into the top of the expansion tank, >> sealed the gap with a shop rag, and blew some air in. >> >> A lot more coolant came out, but not the nearly five gallons my >> owner's manual says is in the system. >> >> Other than disconnecting hoses from the friggin' water pump which I >> will /not/ do willingly (the 1.9 doesn't make it easy to get to them), >> is there something else I can do to get a more complete flush? >> >> The van is parked with the nose slightly elevated. It could be pushed >> off the ramps to lower the nose if that would help. >> >> Suggestions from anyone other than David Bereil are welcome. He told >> me to test the new radiator by jamming a screwdriver through the >> coils. I'm not sure I can trust him any more. >> >> -- >> Jack "Rocket j Squirrel" Elliott >> Bend, Ore. >> 1984 Westfalia. A poor but proud people. >> 1971 "Ladybug"-brand utility trailer ca. 1972 from a defunct company >> in San Clemente, Calif., now repurposed as The Westrailia. >> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.