Date:         Tue, 8 May 2012 22:20:01 -0400
Reply-To:     Pat <psdooley@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pat <psdooley@VERIZON.NET>
Subject:      Re: Rear Wheel (Bearing?) squeak
Comments: To: craig cowan <phishman068@GMAIL.COM>
In-Reply-To:  <CAH3v19LKn+Rr9KvzcoGH44aJsh9FeYeci342j4tqZC2bXa5Veg@mail.gmail.com>
Content-type: text/plain; charset=US-ASCII

Dennis got me thinking about the backing plates.
Where the shoes contact the plate should be lubed with brake grease or anti
seize.
Lots of vehicles have this problem.  Had an Escalade with rear discs and
integrated drum parking brake.  The little shoe in the parking brake was dry
and squeaking with every revolution of the wheel.  A little brake caliper
grease quieted her right down.


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
craig cowan
Sent: Sunday, May 06, 2012 3:43 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Rear Wheel (Bearing?) squeak

Hola gang!
I now have my '87 Sunroof Syncro Registered and Inspected in PA! I've got
250 miles on my zetec install and life is grand.
Aside from potentially having to pull it back out due to a leaking rear
main seal (YUCK!), having yet to reboot and repack the front CV's.... she's
ready for the road.

During the restoration process I replaced the rear brake components as well
as disassembled, inspected, repacked, rebooted, and reinstalled the Rear
CV's. I have not done the rear wheel bearings however.
This van sat for 15 years, so all systems are suspect.

I currently have a squeeking with every revolution coming from the rear
wheels (mainly the drivers side), but it strangely subsides/goes away
during braking....?
Or at least changes pitch.