At 5/24/2012 06:13 PM, Ben T wrote:
>Once upon a time, a local shop did offer such services. I would >drive/tow a Vanagon in with a Wasserboxer. A few days later, I would >go over and settle my bill. Hop in the cab and drive away. Now >that's "turn key". You turn the key in the ignition and go.
That's getting a shop to do a conversion & that's what the RMW deal sounds like, with a rebuilt engine. Calling it "turn key" sounds like marketing.
"Turn key engine" would be getting an engine that was ready to bolt in place. Remove what's there, put the new engine in, hook up the wires, fuel lines, throttle, check the oil and start it. You could pick up the engine or it could be delivered on a pallet. It's complete, has been tested, adjusted & already run. Just needs to be put in the Vanagon. Contact http://www.smallcar.com/ in Tacoma or Ben http://www.benplace.com/bjp3.htm up in Quebec and see what they want ($$) for a conversion. Then you are comparing apples to apples.
Rob becida@comcast.net Western Washington State, USA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.