Shoulda used quotes. Meant "welded". e.g.: super rusted! :) Neil. On Fri, May 25, 2012 at 9:55 AM, ralph meyermann <ralphmeyermann@gmail.com>wrote: > They didn't appear to be welded,a health layer of rust though > > Velma 82diesel 1.6 na westy > > On May 25, 2012 11:53 AM, "neil n" <musomuso@gmail.com> wrote: > > I could be using the wrong term, but am referring to part between lower > ball joint and control arm. The radius rod attaches to bottom of the > adaptor. An image of my '81 while I was doing the radius arm bushings job. > You can see the new lower ball joint installed to the adaptor I refer to: > > http://sites.google.com/site/tubaneil2/RadiusArmInstall.jpg > > Neil. > > > > On Fri, May 25, 2012 at 9:40 AM, ralph meyermann <ralphmeyermann@gmail.com> > wrote: > > > > Adaptor? A... > > -- > Neil n > > 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp > > '88 Slate Blue Westy ... > >
-- Neil n 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp '88 Slate Blue Westy to be named. '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG Gas I4/VR Swap Google Group: http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.