At 08:23 AM 5/25/2012, pickle vanagon wrote: >What is the name of the connector type used on the fuel injectors / Temp 2 >sender / aux air valve / 2.1 o2 sensor heater? (They are all the same I >believe.) I believe (from looking at the picture) that it's 037 973 202 for the shell. There are eight different contacts listed depending on the size of the wire to be used: 000 979 121 and 121 A for 0.5 mm^2, 000 979 131, A, B, AB for 1.o mm^2, 000 979 225, A for 2.5 mm^2. No indication of differences within the sizes; they may be equivalent. From the nature of the connector shell they all have to be female. I can't tell which of the listed rubber boots is intended for this, although I could narrow it down to a few likely ones. With decent luck the parts guy at the dealer would know. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.