Date:         Fri, 25 May 2012 09:53:00 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Radius rod/arm sourced
Comments: To: ralph meyermann <ralphmeyermann@gmail.com>
In-Reply-To:  <CAAj276w6pC+cWeupiQEbydgthp4uc8mZKnK09C=ArcX9H_4JAQ@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

I could be using the wrong term, but am referring to part between lower
ball joint and control arm. The radius rod attaches to bottom of the
adaptor. An image of my '81 while I was doing the radius arm bushings job.
You can see the new lower ball joint installed to the adaptor I refer to:

http://sites.google.com/site/tubaneil2/RadiusArmInstall.jpg

Neil.

On Fri, May 25, 2012 at 9:40 AM, ralph meyermann
<ralphmeyermann@gmail.com>wrote:

> Adaptor?  All looks bolted to me,pre 84 3/4
>
> Velma 82diesel 1.6 na westy
>
> On May 25, 2012 11:30 AM, "neil n" <musomuso@gmail.com> wrote:
>
> Did you nab the lower control arm adaptors? I found that the radius arm
> bolts were "welded" into one of those on my van. Super glad I had spares.
>
> Neil.
>
>
>
> On Fri, May 25, 2012 at 9:26 AM, ralph meyermann <ralphmeyermann@gmail.com>
> wrote:
> >
> > I needed mo...
>
>


--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines