Date:         Tue, 22 May 2012 06:51:34 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: seized bolts
Comments: To: William <grateful@SWCP.COM>
In-Reply-To:  <20120522035116.GA40433@tenma.swcp.com>
Content-Type: text/plain; charset="US-ASCII"

The heat wrench! Oxy Acetylene torch. You need to heat the housing fast
enough for it to expand faster than the bolts. You need some skill here.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
William
Sent: Monday, May 21, 2012 11:51 PM
To: vanagon@GERRY.VANAGON.COM
Subject: seized bolts

I recently removed the waterpump and thermostat housing from my
1984 vanagon only to find the gasket between the hose flange and the housing
to be bulging and leaking.  When I attempted to remove one of the 6mm bolts,
I broke the head off the bolt.  I thought my only option now was to break
off the other bolt head, remove the hose flange, remove the gasket, and soak
the threads with Sea Foam.
I applied Sea Foam twice a day for a week.  I thought now the bolts may move
slightly so make more paths for the penetrating oil.  I put a small
vise-grip on the bolt stub but the bolt did _not_ move.
I do not want to apply so much torque to twist off the bolt stub.

I tried turning clockwise. Nothing.

I tried turning counter-clockwise. Nothing.

I tried freezing the entire housing with the vise-grip attached and then
heating just the aluminum housing around the bolt with a propane torch.  No
movement.

I tried many small impact taps on the bolt stub. No movement.

I read on-line somewhere three important steps when removing seized bolts:
1) Be patient.
2) Be very patient.
3) Be extremely patient.

My next trick is to spray the bolt with super coolant to make it contract.
I assume the local napa will have something environmentally friendly.

What am I forgetting?
I am open to any and all suggestions to remove the seized bolts.

Does anyone have a spare used water pump thermostat housing laying around
you want to sell?

Attached is a photo of my poor tortured housing.

--
William
grateful@nmia.com

505 440 0760

Too many people spend money they haven't earned, to buy things they don't
want, to impress people they don't like.
-Will Rogers