Look at the bolts where the seat is attached to the van. Two on each side. Just loosen the rear bolts and remove the front ones. You will then be able to lift the bar up high enough to clear the heater cover. While the cover is off you can cut the cross piece to make things easier for next time. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of JRodgers Sent: Tuesday, May 29, 2012 12:21 PM To: vanagon@GERRY.VANAGON.COM Subject: Rear Heater Cover Removal I need to remove the rear heater cover in my Dove Blue '88GL. Is there a way to get that sucker out of there without taking the back seat out. The cover has been loosened from the floor, but I can't move it forward to clear the heater core because of a metal bar in front of it that is part of the seat mechanism. Anyway to get at it otherwise? Thanks, John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.