At 01:48 PM 5/29/2012, pickle vanagon wrote: >I plan to clean the cluster contacts and the probe contacts later in the >week as a first step (and carry out David's suggested test of the gauge >response time.) Suggest as a first step you unplug the level controller and leave it out for a while. If the problem still happens, you've isolated it to the cluster/gauge area. I know it's a pain on the 1.9l but you can remove it from below, I believe. Takes some wiggling. Better to not disturb the cluster if possible. Yrs, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.