Date:         Thu, 31 May 2012 16:34:27 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: new switch
Comments: To: ed donnen <spliced.surprise@gmail.com>
In-Reply-To:  <CAFwVvJD5ix-arnKhRy6a5e+LHaeBOyKN56dMLrWim566PsLw_g@mail.g
              mail.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 03:51 PM 5/31/2012, ed donnen wrote:
>oh bugger!  My turn signals work.  I was hoping it was the relay- I
>just found it in the diagram. The EF just gives me a signal of the
>directionals as "steady on"

My Bentley is at the shop right now, but the main thing the 4-way
switch does is change the power source to one that's always on, and
hook the two sides of the car in parallel.  May be a switch
issue?  Possibly a bent pin if you've had it unplugged?  Hope this
helps a bit.  My article about circuit tracing at the vanagon wiki
may help if you're having trouble following the circuits out.  All
switches are shown in their off or mechanically neutral position.

Yrs,
d