Date:         Thu, 31 May 2012 16:38:54 -0500
Reply-To:     nirav patel <agencia72@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         nirav patel <agencia72@GMAIL.COM>
Subject:      specs for the 3 roll pins and six bolts for the clutch
Content-Type: text/plain; charset=windows-1252

Howdy.

Was wondering if you might know the spec or where I could source the following?

• 3 roll pins that align the clutch to the flywheel
• 6 bolts for the clutch

I called my local VW pick-n-part, but they had nothing for me. They
recommend that I find the spec and be sure to use grade 8 bolts when
replacing.

I would pull the parts from my 1.9 in my westy, but due to space I'm
having to dress the zetec engine independent of working on the van.
I'm doing all this in front of my condo and our courtyard at the
moment. Wish me luck.

http://niravpatel.posterous.com/amurican-made-come-along-tool

+nirav

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.