Date:         Thu, 31 May 2012 19:23:32 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: specs for the 3 roll pins and six bolts for the clutch
Comments: To: nirav patel <agencia72@GMAIL.COM>
In-Reply-To:  <CAGa4r68ra6K-ohd70OfMBnB9Q7T7zrDUK9WnVMGfYjO5zCdYWA@mail.gmail.com>
Content-Type: text/plain; charset="US-ASCII"

The pin is 6mm X 18mm, part number N90010002.

The bolts for the pressure plate are M8 X 16 X 1.25. N0102935. If you feel
the need for washers use good quality wave washers or hardened flats.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
nirav patel
Sent: Thursday, May 31, 2012 5:39 PM
To: vanagon@GERRY.VANAGON.COM
Subject: specs for the 3 roll pins and six bolts for the clutch

Howdy.

Was wondering if you might know the spec or where I could source the
following?

. 3 roll pins that align the clutch to the flywheel . 6 bolts for the clutch

I called my local VW pick-n-part, but they had nothing for me. They
recommend that I find the spec and be sure to use grade 8 bolts when
replacing.

I would pull the parts from my 1.9 in my westy, but due to space I'm having
to dress the zetec engine independent of working on the van.
I'm doing all this in front of my condo and our courtyard at the moment.
Wish me luck.

http://niravpatel.posterous.com/amurican-made-come-along-tool

+nirav