Hi all. A 35", 7mm (or 5/16" ?), piece of fuel hose, with a ~ 45º face at hose end, fits into intake or exhaust of the Dometic 182 fridge. At 35", with ~ 3" still exposed, I'm pretty sure hose stops at dimples on exhaust tube. Hose doesn't appear to go all the way down to burner inserted into intake pipe. But. It may serve to clean the tubes themselves as you work your way in. The ~ 45º angle on end or hose helped it move along the corrugated interior of intake or exhaust pipe. I pushed hose on to a wood dowel, then shaped end. I used rubber coated hose. Shaping a braided piece of hose may allow bits of the braid to fall into combustion box and may not slide as easily. Lubed hose with a little WD-40 and twisted it L/R as I pushed it in. Neil.
-- Neil n 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp '88 Slate Blue Westy to be named. '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG Gas I4/VR Swap Google Group: http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.