Yep. That's exactly what I did. Worked fine. On Jun 6, 2012, at 10:25 AM, pickle vanagon wrote: > > (for all the plugs, I figure I'll just cut their rectangles out of the > foil, and solder wires directly onto the metal tabs) The most potentially problematic part with my setup is the instrument lights, which I have soldered into the harness, to eliminate the evil foil entirely. If one of the lights goes, I'll have to solder a new bulb in. The consolation is that since I used LED bulbs, they're not likely to go out soon. -Jarrett |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.