Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2012, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 6 Jun 2012 21:58:41 -0500
Reply-To:     JRodgers <jrodgers113@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JRodgers <jrodgers113@GMAIL.COM>
Subject:      Re: Help Please, Lost Brakes :-(
Comments: To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
In-Reply-To:  <BAY152-ds192E6C80775A62D64B13AAA0F30@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Dennis, you ARE saying to open the bleeders before pushing the pads in. You DO NOT want the old fluid going back into the tank, right? I don't mean to restate the obvious, just wanted to be clear in my own mind. I may be up for this soon.

Regards,

John Rodgers

On 6/6/2012 6:01 PM, Dennis Haynes wrote: > Sounds like one the checks in the master cylinder failed. With the reservoir > visible push on the pedal. If there is any sign of fluid going back in when > pressing the master is the problem. When the brakes were done was the > bleeders opened on the calipers opened when the pistons were pushed back in > or was that fluid pushed back up into the master? That can often be a cause > of master failure after a brake job. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Harry Hoffman > Sent: Wednesday, June 06, 2012 9:45 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Help Please, Lost Brakes :-( > > Hi All, > > So I was driving all today and all of the sudden my brakes stopped working. > > I was attempting to slow down coming to a stop sign when the pedal went > straight to the floor. > > I pumped the brake pedal and got pressure back when attempting to depress > the pedal but then eventually it the pedal went back down to the floor. > > Sometimes the pedal will drop to the floor without any resistance and other > times there will be some resistance before hitting the floor. > > The reservoir is still at the max level and the emergency brake is holding > on a incline. > > It's a 1989 vanagon with the bostig setup. > > Both front discs and rear drums were replaced ~ 1000mi ago. > > Help, please! > > Cheers, > Harry >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.