Date:         Thu, 7 Jun 2012 10:59:59 -0400
Reply-To:     Kurt Grotz <kurtgrotz@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kurt Grotz <kurtgrotz@GMAIL.COM>
Subject:      Fuel tank cross over
Content-Type: text/plain; charset=ISO-8859-1

Am doing tank replacement.  I have everything in place and set to bolt
in.....  Unsure about one thing... should the cross over breather go up and
around the coolant piping, or can I plug it in and push tank up.   I hate
to let it down and try the later procedure - but will if I have to.

Funny - I did this a couple of years ago and remember it as being easy.
 What was I thinking.  It is the hardest easy job on the vehicle I think.
 Plus - I have been working on Reg Vans for 20+ years.  My head is used to
clear sailing when crawling under.  Got several gashes in the old nogger
from the propane unit to remind me of the difference.   I think I will
remember in the future.  Headbanging and bald don't do good together.

Have fun you all.
--
Kurt Grotz
484-477-2109
kurtgrotz@gmail.com

86 Vanagon
87 Westy