Date:         Thu, 7 Jun 2012 16:39:04 -0400
Reply-To:     Ken Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: Trailing arm bushings
Comments: To: ralph meyermann <ralphmeyermann@gmail.com>
In-Reply-To:  <CAAj276xeCqjWYkBxTWJvyX+gZ0w0ZK+fqMXKJ_aOkagzE289Kw@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

That is what this no hub coupling is like.  You can take a drive down to
Home Depot and buy one off of the shelf for about $8.

--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com
Phone: 856-327-4936
Fax: 856-327-2242



On 6/7/2012 4:19 PM, ralph meyermann wrote:
>
> what I was thinking was a small ring compressor could work if I had one!!
>
> Velma 82diesel 1.6 na westy
>
>> On Jun 7, 2012 3:15 PM, "Ken Wilford" <kenwilfy@comcast.net
>> <mailto:kenwilfy@comcast.net>> wrote:
>>
>> Lots of vasoline, and compress the rear bushing with that no hub cast
>> iron coupling (take rubber part out of the middle and use it as a
>> compression tool).
>> http://www.homedepot.com/h_d1/N-5yc1v/R-100372291/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=no+hub+cast+iron&storeId=10051
>> <http://www.homedepot.com/h_d1/N-5yc1v/R-100372291/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=no+hub+cast+iron&storeId=10051>
>>
>> HTH.
>>
>>
>>
>> On 6/7/2012 3:49 PM, ralph meyermann wrote:
>> >
>> > Hi gang is there any trick to ease the installatio...
>>
>> --
>> Thanks,
>> Ken Wilford
>> John 3:16
>> www.vanagain.com <http://www.vanagain.com>
>> Phone: 856-327-4936 <tel:856-327-4936>
>> Fax: 856-327-2242 <tel:856-327-2242>
>>