On Mon, Jun 11, 2012 at 5:52 PM, neil n <musomuso@gmail.com> wrote: > > FWIW to others, soldering two 10uf caps in parallel to connectors inside > AFM, is a minor PITA. New plan is to solder them at leads pre connector. > Neil, there is more room to work and a larger area for the capacitors if they are soldered into place in the connector on the cable. Drawback: You can't take it out of the van to do the work. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.