At 12:55 PM 6/12/2012, neil n wrote: >cap to them or use a wire stripper to pull back wire casing to do same. I know it's too late, but for the record: This isn't going to work except possibly on a very short wire (few inches). You might be able to strip a piece toward the end and then slice it off with a knife, then strip another piece farther back also toward the end, leaving you a bit of clear wire in the middle. But a knife is probably easier. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.