Date:         Sat, 9 Jun 2012 08:52:52 -0500
Reply-To:     JRodgers <jrodgers113@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JRodgers <jrodgers113@GMAIL.COM>
Subject:      Re: Factory Hose Clamps
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY152-ds14960FC75714931B6CB957A0F10@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Dennis,

That is exactly what I have on my heater hose. Didn't know what to call
it. This solves the mystery for me.

Thanks for posting this info.

John

On 6/9/2012 8:01 AM, Dennis Haynes wrote:
> As for the clamps they are actually common Roto-Clip.
> http://www.rotorclip.com/cat_pdfs/ctb.pdf
>
> The sizes you need are available McMaster Carr.
> http://www.mcmaster.com/#standard-hose-clamps/=hwh1s4
>
> For what they cost I like to replace them. They do stretch out and loose
> tension. On the outside they can also rust.
>
> Dennis

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.